Descripción
Three-phase Input Voltage:
Standard executions 50Hz 220-230/380-400V; 60Hz 220-240/440-480V
(for sizes 150 and 200 standard execution 50Hz- 380-400/660-690V; 60Hz 440-480/760-830V)
Special input voltages available on request.
BM series vibrating motors are suitable for use with Variable Frequency Drive (VFD-Inverter).
Speed (vibrations/minute)
Standard:
2 poles: 3000 rpm – 50Hz 3600 rpm – 60Hz
4 poles: 1500 rpm – 50Hz 1800 rpm – 60Hz
6 poles: 1000 rpm – 50Hz 1200 rpm – 60Hz
8 poles: 750 rpm – 50Hz 900 rpm – 60Hz
On request:
10 poles: 600 rpm – 50Hz 720 rpm – 60Hz
12 poles: 500 rpm – 50Hz 600 rpm – 60Hz
Duty
Continuous duty at the maximum centrifugal force (S1), with the possibility to adjust the force from 0 to 100% following the specific graded plate on the eccentric weights.
Mechanical Protection-Impacts Protection
IP 65-7.
Electric Motor
Electric motor realized with low loss silicium magnetic lamination core, allowing to increase the efficiency while reducing heating up.
Insulation Class
F standard, H on request.
Tropicalisation
Windings impregnation realized with ASTM system, with polyester resin class H.
Ambient Temperature
From -20°C to 40°C (-4°F/104°F).
Overheating Protection
Electric motor protected by thermistor (PTC set at 130°C) as standard from size 50 (available on request on smaller sizes).
Motor Shaft
Shafts in NiCrMo steel, heat treated.
Main Body
Mechanical structure designed to withstand the high stresses, realized in cast iron (starting from size 03) or in high resistance aluminum (up to size 02)
Painting
Electrostatic powder painting, epoxy-polyester, polymerized in oven. Color: Blue RAL 5010
Bearings and Lubrication
High load capacity bearings, in special executions to withstand the stresses of high centrifugal forces and vibrations, with special “Long-Life” grease lubrication. Labyrinth type bearing seal for grease, with wide restraining chamber.
Available on request
Stainless steel weight covers
Special fixing holes configurations
Anti-condensation heaters
